High Quality High Speed Micro Centrifuge - Benchtop high speed large capacity centrifuge machine TG-1850 – Shuke

1.Variable frequency motor.

There are three kinds of motor-Brush motor,brushless motor and variable frequency motor,the last one is the best. It is low failure rate,eco-friendly,maintenance-free and good performance. Its good performance makes the speed accuracy reach up to ±10rpm.

2.Electronic safety door lock.

When the centrifuge is under operation,we must make sure the door will not open.We use electronic door lock to ensure safety.

3.Automatic rotor identification.

Put down the rotor and no need to operate,the centrifuge can identify the rotor. This function can prevent over-speed.

4.Three-axis gyroscope dynamically monitors operation balance.

Balance is very important when the centrifuge is under operation,three axis gyroscope can dynamically monitors operation balance.

5.RCF can be set directly.

If we know the Relative Centrifugal Force before operation,we can set RCF directly,no need to convert between RPM and RCF.

6.Can reset parameters under operation.

Sometimes we need to reset parameters such as speed,RCF and time when the centrifuge is under operation, and we don’t want to stop,we can reset parameters directly,no need to stop,just use your finger to change those numbers.

7.19 levels of acceleration and deceleration rate.

How the function works? Set an example,we set speed 10000rpm and press the button START,then the centrifuge will speed up from 0rpm to 10000rpm. From 0rpm to 10000rpm,can we make it take less time or more time,in other words,run faster or slower? Yes,this centrifuge supports.

8.Can store 12 programs.

In daily usage,we may need to set different parameters for different purpose. This centrifuge can store 12 programs.